RCModelScout.

ReadyMadeRC

OSD PRO PKG WITH 100A ELOGGER/WIRE LEADS AND GPS

Here are some examples:, , And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, , The package includes:,

ReadyMadeRC

OSD PRO PKG WITH 150A ELOGGER/WIRE LEADS AND GPS

Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder, The package includes:,

ReadyMadeRC

1.2GHZ LM 8CH PRO PORTABLE WIRELESS AV RECEIVER BUILT-IN BATTERY

Includes:, Pro Lawmate 1.2GHz receiver, Frequencies:, , For channel selection:  All switches should be in the "up" position except for the switch number that matches channel you are using.  The A/B switch should be on A for channels 1-4, and B for channels 5-8.,

ReadyMadeRC

1.2GHZ LM 8CH PRO PORTABLE AV RECEIVER UPGRADED SAW FILTER

Includes:, Pro Lawmate 1.2GHz receiver with upgraded SAW filter, Frequencies:, , For channel selection:  All switches should be in the "up" position except for the switch number that matches channel you are using.  The A/B switch should be on A for channels 1-4, and B for channels 5-8.,

ReadyMadeRC

2.4GHZ 8CH PRO PORTABLE WIRELESS A/V RECEIVER -BUILT-IN BATTERY

Includes:, Pro Lawmate 2.4GHz receiver, Frequencies:, , For channel selection:  All switches should be in the "up" position except for the switch number that matches channel you are using.  The A/B switch should be on A for channels 1-4, and B for channels 5-8.,

ReadyMadeRC

OSD PRO PKG WITH 100A ELOGGER/INTEGRATED CONNECTORS AND GPS

Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), And, the location of the icon on the screen provides a synthetic map, similar to RADAR:, the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder, The package includes:,

ReadyMadeRC

OSD PRO EXPANDER

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,

ReadyMadeRC

SASQUATCH LABS / HOVERTHINGS FLIP FPV PRO

Product Features & Specs:, , Camera Equipment:, , Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,

ReadyMadeRC

RADIAN PRO PNP

ReadyMadeRC

IFTRON - STINGER PRO 5.8GHZ 25MW AV TRANSMITTER

Item Description Our new Lower Power Nano 5.8 transmitters conform with the power requirements of many countries that limit the RF power to 25mw. Features include: on-board switching power for ultra-wide input voltage, plus one line-level audio input- all at a very economical price. Want more power and features? Please see our Mondo Stinger 5.8 or Stinger Pro 8.5 transmitters. Comes with whip antenna Audio cable and one of these Plug & Play Power/video Cables (See picture below) If you already have a camera that uses a 3 pin connector, please check the connector picture for wiring compatibility with your camera. If your camera is opposite of ours, please ask for a "REVERSE" cable when ordering or you will have to reverse it yourself. All Iftron Transmitters are Urethane Conformal Coated for moisture protection. Comes with antenna and input cable. Made in USA Lead Free Wiring and Information Here,

ReadyMadeRC

PRO CAMERA PAN AND TILT KIT

Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft.  If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required., This kit includes:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for the servos listed in the options below.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,

ReadyMadeRC

CASTLE CREATIONS BEC SWITCHING REGULATOR PRO - 20A PEAK

NOTE: CC BEC Pro should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit., : 4.8V to 12.5V,

ReadyMadeRC

CHIMERA FLYING WING - PRO KIT (GOPRO HOUSING, LINKAGES)

Specifications:, , Both the PRO and Standard version come with the following:, , The Pro comes with these extras:, , Motor:, I recommend a 400-600 Watt motor. More power is fun, but anything over 700Watts is more than you need with this airplane and will reduce flight times. I personally use a 3015 - 1640kv and 8X prop. A large 1500 kV and 9X5 or 9X6 would do well also., Servos:, The pro has cuts for 12 gram metal gear servos (I like the Corona 939MG's, personally). However a larger servo can be beneficial such as the Hitec HS82MG. I recommend a metal gear servo as the elevons are solid wood and can strip a servo in a wreck., Average flight expectations:, , Build Tutorial:,

ReadyMadeRC

SASQUATCH LABS / HOVERTHINGS FLIP SPORT PRO

Product Features & Specs:, , Camera Equipment:, , Not recommended. It's a sport flyer, go fly it, have fun.  :), Included in each build:, , Pro Model Features:, , Parts Required To Fly:, , Build and Tuning Documentation:,

ReadyMadeRC

IFTRON - YELLOWJACKET 5.8 PRO DIVERSITY RECEIVER WITH USB DVR

BONUS: The receiver can be powered directly from the computer - right through the provided USB cable, or from an external battery!, :, , :, , Size:, , Weight:, , Input Voltage:, , Input Power:, , Antenna Inputs:, , RF Sensitivity:, , Video Output:, , Dual Audio Outputs:, , Microphone Input:, , Microphone Volume:, , Output Connection:,